Product ID:SPEEDHIDE INHIBITIVE PRIMERS 6-L, 6-212
MSDS Date:05/04/1990
FSC:8010
NIIN:00N039299
MSDS Number: BRJCZ

PPG INDUSTRIES INC

260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555;800-441-9695

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

TERM STUDY DEVELOPED LUNG TUMORS. STUDIES W/HUMANS

RTECS: 9999999ZZ

OF CANCER FROM EXPOSURE. POTENTIAL FOR INHAL OF

RTECS: 9999999ZZ

SINCE OVEREXP IS NOT EXPECTED, THERE IS NO

RTECS: 9999999ZZ

OR MD IMMED. HAVE MSDS INFORMATION AVAIL.

RTECS: 9999999ZZ

IRRITATION OR BREATHING DIFFICULTIES.

RTECS: 9999999ZZ

IN EXCESS OF A FEW INCHES.

RTECS: 9999999ZZ

CAREFULLY TO DETERMINE TYPE OF AIRBORNE CONTAM

RTECS: 9999999ZZ

THE LOWEST SUGGESTED EXPOSURE LIMITS. THE LEL SECTION

RTECS: 9999999ZZ

AND TO REMOVE DECOMPOSITION PRODUCTS DURING WELDING

RTECS: 9999999ZZ

BARIUM METABORATE; (BARIUM METABORATE MONOHYDRATE)

CAS: 13701-59-2

RTECS: CQ9570000

Fraction By Weight: 5-10%

OSHA PEL N/K

ACGIH TLV: N/K

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 20-25%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

CALCIUM BOROSILICATE

CAS: 69796-15-9

Fraction By Weight: 5-10%

OSHA PEL N/K

ACGIH TLV: N/K

PIGMENTS

Fraction By Weight: 5-10%

OSHA PEL N/K

ACGIH TLV: N/K

NAPHTHA, MEDIUM ALIPHATIC

CAS: 64742-88-7

Fraction By Weight: 25-30%

OSHA PEL N/K

ACGIH TLV: N/K

P-MENTHA-1,8-DIENE; (TERPENE HYDROCARBON)

CAS: 138-86-3

RTECS: OS8100000

Fraction By Weight: 1-2%

OSHA PEL N/K

ACGIH TLV: N/K

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 30-35%

OSHA PEL N/K

ACGIH TLV: N/K

INJURY KNOWN AS SILICOSIS. THESE EFTS ARE

RTECS: 9999999ZZ

OF PROD IS NOT EXPECTED TO GENERATE EXCESS AMTS OF

RTECS: 9999999ZZ

LIMITED.THIS PROD CNTNS TITANIUM DIOXIDE. ANIMALS

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL/FATAL IF SWALLOWED.
EYE:CAUSES EYE IRRIT. SKIN: MAY CAUSE MOD SKIN IRRIT. INHAL:VAP &
SPRAY MIST MAY BE HARMFUL IF INHALED. SANDING & GRINDING DUSTS MAY
BE HARMFUL IF INHALED. VAPOR IRR IT EYES, NOSE, & THROAT. RPTD
EXPOSURE TO HIGH VAP CONC MAY CAUSE IRRIT OF THE RESP SYS & PERM
BRAIN & (EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE - QUARTZ: GROUP 2A
(IARC)7,341,87, ANTICIPATED TO BE A CARCINOGEN (NTP 6'TH ANN RPT
91).
Effects of Overexposure:HLTH HAZ:NERV SYS DMG. INTENTIONAL MISUSE BY
DELIB CONC & INHALING CONTENTS CAN BE HARMFUL/FATAL. CHRONIC:AVOID
LONG TERM & RPTD CNTCT. THIS PROD CNTNS A FORM OF CRYSTALLINE SILCA
WHICH IARC ASSOCIATE S W/AN INCR RISK OF CANCER IN LAB ANIMALS.
LONG-TERM EXPOS TO CRYSTALLINE SILICA MAY ALSO LEAD TO A DISABLING
(ING 8)

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH EYES IMMED W/PLENTY
OF WATER FOR @ LST 15 MIN. SKIN: FLUSH IMMED W/PLENTY OF WATER
FOLLOWED BY WASHING W/SOAP & WATER. INHAL: IF AFFECTED BY INHAL OF
VAPOR/SPRA Y MIST, REMOVE TO FRESH AIR. APPLY ARTFRESP & OTER
SUPPORTIVE MEASURES AS REQUIRED. OTHER:IF ANY OF THE FOLLOWING
OCCUR DURING/FOLLOWING USE OF THIS PROD CNTCT A POIS CTRL CTR, EMER
ROOM (ING 14)

Flash Point Method:PMCC
Flash Point:110F,43C
Lower Limits:1.0%
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING (SUPP
DATA)
Fire Fighting Procedures:WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY
BE USED TO COOL CLSD CNTNRS TO PVNT PRESS BUILD-UP & POSS
AUTOIGNITION/EXPLOSION WHEN EXPOSED TO EXTREME(SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS, & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE
WHEN EXPOSED TO EXTREME HEAT. DO NOT APPLY ON(SUPP DATA)

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERSONNEL EQUIPPED
W/PROPER NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHLD BE PERMITTED
IN AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL
W/SAWDUST, VERMICULITE OR OTHER ABSORBENT MATL & PLACE INTO CNTNR
FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORGE OF NFPA
CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:IF THIS MATL IS PART OF A MULTIPLE COMPONENT COATING
SYS, READ THE MSDS FOR THE OTHER COMPONENT(S) BEFORE BLENDING AS
THE RESULTING MIX MAY HAVE THE HAZ OF ALL ITS PARTS. CNTNRS SHLD BE
GROUNDED WHEN POURING. AVOID FREE FALL OF LIQS(ING 16)

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CONTROLS. VAPOR EXHST OR FRESH AIR ENTRY. NIOSH/MSHA APPRVD
(TC-23C) PAINT SPRAY OR AIR SUPPLED (TC-19C) RESP MAY ALSO REDUCE
EXPOSURE. READ RESP MFR' S INSTRUCTIONS & LITERATURE (ING 17)
Ventilation:PROVIDE GEN DILUTION OR LOC EXHST VENT IN VOL & PATTERN TO
KEEP THE CONC OF INGRED LISTED IN INGRED SECT BELOW (ING 18)
Protective Gloves:NITRILE RUBBER, NEOPRENE RUBBER OR PVA.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA: NFPA CLASS II COMBUST LIQ FIRES. FIRE FIGHT PROC: HEAT.
IF H*2O IS USED, FOG NOZZ ARE PREFERABLE. WEAR NIOSH/MSHA APPRVD
SCBA & FULL PROT EQUIP . EXPLO HAZ: HOT SURFS. TOX GASES MA Y FORM
WHEN PROD IS CONTACTED BY FLAME/HOT SURFS. DECOMP PROD: PRODUCE
FUMES INCL: CARBON MONOXIDE, ZINC OXIDE.

Boiling Pt:B.P. Text:>280F,>138C
Vapor Pres:< 3
Vapor Density:HVR/AIR
Spec Gravity:1.3-1.4
Evaporation Rate & Reference:< 18(BUTYL ACETATE=100)
Solubility in Water:< 1%
Appearance and Odor:VISCOUS LIQUID W/AN ODOR CHARACTERISTIC OF THE
SOLVENTS LISTED IN INGRED SECT.
Percent Volatiles by Volume:< 48

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIS, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURF COATED WITH THIS
PROD MAY (SUPP DATA)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE AND PROVINCIAL AND LOCAL ENVIORNMENTAL CONTROL
REGS. EMPTY CNTNRS SHLD BE RECYLCED OR DISPOSED OF THROUGH AND
APPROVED LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.